wpe2.gif (2620 bytes)

Fluid-o-Tech Stainless Steel Rotary Vane Pumps

1.gif (57236 bytes) The inlet and outlet ports are 3/8" NPT threaded.

The pump is equipped with a built-in by-pass.  Upon request the pump is also available without by-pass.

The motor coupling may be either direct through a metallic clamp or through an elastic coupling.

All models, upon request, are available:

  • with special clearances (suffix - H) for temperature higher than 70C (158F) max 90C (194F)
  • with Viton/EPDM seals (suffix - V/E) for special fluids
  • NSF listed pumps for potable water. In this case the prefix for each model is PA instead of PO

NSF listed pumps available for potable water.

 

Technical features and
manufacturing characteristics

The rotary vane pump is stainless steel AISI 303 made, while the pumping chamber and the vanes are in graphitic carbon.

 Main Applications
  • Soda circulation in post-mix drink dispensers
  • Cooling Systems
  • Reverse osmosis
  • Ultra-filtration

 

2.gif (18115 bytes)

Fluid-o-Tech stainless steel rotary vane pumps

Chart 1.eps (359546 bytes)

1450RPM.eps (415946 bytes)

 

Chart 2.eps (359714 bytes)

1725RPM.eps (418054 bytes)