|
- THOMAS CHECK VALVE
- 1/4" M.P.T. x .265 Barb - PART # 07-6158
|
|
- NEEDLE CHECK VALVE
- 1/4" M.P.T. x 1/4" Flare - PART #
07-6042
- 1/8" M.P.T. x 1/4" Flare - PART #
07-6044
|
|
- 'Y' FITTING
- 1/4" M.P.T. x 1/4" FE.FL. - PART #
07-6144
- 1/8" M.P.T. x 1/8" FE.FL. - PART #
07-6107
|
|
- STREET TEE
- 1/4" F.P.T. x 1/4" F.P.T. x
1/4" M.P.T. - PART # 07-7210
|
|
- CHECK VALVE ASSEMBLY
- 3 Outlet - PART # 07-1043
- 5 Outlet - PART # 07-1045
|
|
- PERMANENT CO2 COUPLING SEAL KIT - PART
# 07-1040
- Easy to install:
Cylinders equipped with a Superior or Selpac valve are pretapped to accept seal kit.
However, if your valve is not tapped to accept seal kit, proceed as follows:
- Drill valve outlet 1/4" diameter,
3/4" deep. Be sure to use drill stop.
- Tap valve outlet 5/16-16" N.C.
thread. 3/8" deep minimum.
- Open valve slightly to blow out chips.
- Install seal kit with 5/32" Allen
key.
- REPLACEMENT O'RING PART # 24-3019
|
