wpe2.gif (2620 bytes)

MCCANNSLOGO.gif (2602 bytes)

STANDARD CARBONATORS MODEL NO. 12-7355

CARB11.gif (2980 bytes)

100 GPH Brass rotary pump with integral strainer - 1/4" MF CO2 inlet - 3/8" MF water inlet - 3/8" MF soda water outlet - stainless steel base with rubber feet for sound isolation - two-piece probe design (reduces service time) - right angle probe service cord - heat sink probe cap - improved probe electronics.

ELECTRICAL DIMENSIONS WEIGHT
15 Vac - 60 HZ - 7 amps
1/3 HP motor
 H-11"   W-9" D-11 1/2" 25 lbs.

 

STANDARD CARBONATOR MODEL NO. 12-7355

CARB12.gif (8768 bytes)

 

STANDARD CARBONATOR MODEL NO. 12-7355
ITEM PART NO. DESCRIPTION
1 11-6289 PROCON PUMP 100 GPH
2 11-6297 CLAMP, PUMP TO MOTOR
3 08-6311 MOTOR 1/3 HP, 115V, 60 HZ
4 C-2080 SWITCH CORD 115V
5 12-7309 BASE, STD WITH FEET
6 04-7217 INLET/OUTLET FITTING
7 12-7319 TUBE WATER INLET, STAINLESS STEEL
8 07-3135 CAP SCREW, 5/16-18 X 3/8"
9 07-3136 WASHER, LOCK 5/16"
10 07-3137 HEX NUT, 5/16-19
11 12-7304 LOCKWASHER 1/4"
12 99-3116 LOCK NUT 10-32
13 12-7353 SINGLE CHECK VALVE CO2 IN
14 12-7359 PRESSURE RELIEF VALVE
15 12-7357 DOUBLE CHECK VALVE ASSEMBLY WATER IN
16 12-7362 PROBE ELECTRONICS 115V
17 12-7361 FLOAT AND PROBE ASSEMBLY

 

SIMPLEX CARBONATORS - MODEL NO. 12-7350

CARB13.gif (2279 bytes)

100 GPH Brass rotary pump with integral strainer - 1/4" MF CO2 inlet - two to four 3/8" MF soda water outlets - stainless steel base with rubber feet for sound isolation - two-piece probe design (reduces service time) - right angle probe service cord - heat sink probe cap - improved probe electronics.

ELECTRICAL DIMENSIONS WEIGHT
15 Vac - 60 HZ - 7 amps
1/3 HP motor
H-10 1/2"   W-13 1/2"
D-12 3/4"
 28 lbs.

 

SIMPLEX CARBONATOR MODEL NO. 12-7350

CARB14.gif (8724 bytes)

 

SIMPLEX CARBONATOR MODEL NO. 12-7350
ITEM PART NO. DESCRIPTION
1 11-6289 PROCON PUMP 100 GPH
2 02-6034 CAP NUT STAINLESS STEEL 3/8"
3 04-7217 INLET/OUTLET FITTING
4 08-6311 MOTOR 1/3 HP 115V, 60 HZ
5 C-2080 SWITCH CORD, 115V
6 11-6297 CLAMP, PUMP TO MOTOR
7 12-7308 BASE MOUNTING ASSEMBLY
8 12-7316 TUBE WATER INLET, STAINLESS STEEL
10 07-3135 CAP SCREW, 5/16-18 X 3/8"
11 07-3136 WASHER, LOCK 5/16"
12 12-7035 WASHER, FLAT
14 12-7362 PROBE ELECTRONICS 115V
15 12-7361 FLOAT AND PROBE ASSEMBLY
19 12-7359 PRESSURE RELIEF VALVE
20 12-7353 SINGLE CHECK VALVE CO2 IN
21 12-7357 DOUBLE CHECK VALVE, WATER IN
22 03-6002 FLARE GASKET 3/8"

 

BIG MAC CARBONATOR - MODEL NO. 12-7349

CARB15.gif (3118 bytes)

100 GPH Brass rotary pump with integral strainer - 1/4" MF CO2 inlet - two to four 3/8" MF soda water outlets - stainless steel base with rubber feet for sound isolation - two-piece probe design (reduces service time) right angle probe service cord - heat sink probe cap - improved probe electronics.

ELECTRICAL DIMENSIONS WEIGHT
15 Vac - 60 HZ - 7 amps
1/3 HP motor
H-10 1/2"   W-13 1/2"
D-12 3/4"
 28 lbs.

 

BIG MAC CARBONATOR WITH 2 SODA OUTLETS - MODEL NO. 12-7349

CARB16.gif (8057 bytes)

 

BIG MAC CARBONATOR WITH 2 SODA OUTLETS - MODEL NO. 12-7349
ITEM PART NO. DESCRIPTION
1 11-6289 PROCON PUMP 100 GPH
2 08-6311 MOTOR 1/3 HP 115V, 60 HZ
3 C-2080 SWITCH CORD, 115 V
4 12-7310 BASE, STD WITH FEET
5 12-7320 TUBE WATER INLET, STAINLESS STEEL
6 02-6034 CAP NUT, STAINLESS STEEL 3/8"
7 07-3135 CAP SCREW, 5/16-18 X 3/8"
8 07-3136 WASHER, LOCK 5/16"
9 07-3137 HEX NUT, 5/16-19
10 12-7312 SCREW 10-32 X 3/4"
11 12-7313 WASHER FLAT
12 99-3116 LOCK NUT 10-32
13 12-7304 WASHER, LOCK 1/4
14 12-7307 FOOT AND NUT ASSEMBLY
15 03-6002 FLARE GASKET 3/8"
16 12-7359 PRESSURE RELIEF VALVE
17 12-7357 DOUBLE CHECK VALVE, WATER IN
18 12-7353 SINGLE CHECK VALVE, CO2 IN
19 12-7362 PROBE ELECTRONICS 115 V
20 12-7361 FLOAT AND PROBE ASSEMBLY
21 04-7217 INLET/OUTLET FITTING

 

TWO PIECE PROBE PART NO. 12-7361
CARB17.gif (3688 bytes)
  • REDUCED SERVICE TIME AND COST
  • NO NEED TO SHUT CO2 OR WATER OFF DURING SERVICE

RIGHT ANGLE PROBE SERVICE CORD

  • LOWERS CARBONATOR PROFILE
  • REDUCES STRAIN ON PROBE
  • PREVENTS DAMAGE TO ELECTRONICS FROM MOISTURE

HEAT SINK PROBE CAP

  • PROBE LIFE INCREASED DRAMATICALLY

IMPROVED PROBE ELECTRONICS

  • RESISTS HIGH AMPERAGE FROM SPIKES, "BROWN OUT" CONDITIONS, "LOCKED MOTORS", PUMP FAILURES
  • NO EXTERNAL ELECTRICAL COMPONENTS
  • GREATER RELIABILITY
  • FACTORY REPAIRABLE

 

EASY TO TEST TWO-PIECE PROBE

CARB18.gif (1612 bytes)
  1. Remove probe electronics.
  2. Pass magnetic tip of screwdriver by lower end of tube extending from electronics package.
  3. Reed switch closes.
  4. Carbonator operates.