QUICK DISCONNECT SOCKETS
BALL LOCK FOR GENERAL BEVERAGE
- Stainless Steel
- Fitting sets not necessary with barbed nipple sockets. Simply insert into line and secure with either ferrule or Oetiker clamp.
|
PART NO. | DESCRIPTION |
| A1-6150 | Gas disconnect
socket with 90º stainless steel barbed end connection for .265 ID tubing Gray ring on disconnect designates for gas |
|
| A1-6151 | Liquid disconnect
socket with 90º stainless steel barbed end connection for .265 ID tubing Black ring on disconnect designates for liquid |
- Plastic
- Plastic sockets do not shatter, swell, warp, chip, crack or stain under normal use. Two different types of ball lock styles available: (1) barbed nipple for .265 ID tubing (2) 7/16" flared.
|
PART NO. | DESCRIPTION |
| A1-6160 | Gas disconnect
socket with 26º stainless steel barbed end connection for .265 ID tubing Connector Colour - Gray |
|
| A1-6161 | Liquid disconnect
socket with 26º stainless steel barbed end connection for .265 ID tubing Connector Colour - Black |
|
PART NO. | DESCRIPTION |
| A1-6164 | Gas disconnect
socket with 7/16" - 20 B.S. 1/4" Flare Connector Colour - Gray |
|
| A1-6165 | Liquid disconnect
socket with 7/16" - 20 B.S. 1/4" Flare Connector Colour - Black |
PIN LOCK FOR COCA-COLA
- Stainless Steel
- Fitting sets not necessary with barbed nipple sockets. Simply insert into line and secure with either ferrule or Oetiker clamp.
|
PART NO. | DESCRIPTION |
| C1-6138 | Gas disconnect
socket Two slot lock collar With 26º stainless steel barbed end connector for .265 ID tubing |
|
| C1-6139 | Liquid disconnect
socket Three slot lock collar With 26º stainless steel barbed end connector for .265 ID tubing |
- Plastic
- Plastic sockets do not shatter, swell, warp, chip, crack or stain under normal use. All barbed connectors are stainless steel. Three designs available: (1) 7/16" flared for post-mix (2) 1/2" flared for pre-mix (3) barbed for either pre-mix or post-mix.
|
PART NO. | DESCRIPTION |
| C1-6252 | Gas disconnect
socket for post-mix Two slot collar with 26º, 7/16" - 20 B.S. 1/4" flared connector |
|
| C1-6253 | Liquid disconnect
socket for post-mix Three slot collar with 26º, 7/16" - 20 B.S. 1/4" flared connector |
|
| C1-6254 | Gas disconnect
socket for pre-mix Two slot collar with 26º, 1/2" - 16 B.S. flared connector |
|
| C1-6255 | Liquid disconnect
socket for pre-mix Three slot collar with 26º, 1/2" - 16 B.S. flared connector |
|
PART NO. | DESCRIPTION |
| C1-6256 | Gas disconnect
socket for pre-mix or post-mix Two slot collar with 26º stainless steel barbed end connector for .265 ID tubing |
|
| C1-6257 | Liquid disconnect
socket for pre-mix or post-mix Three slot collar with 26º stainless steel barbed end connector for .265 ID tubing |
