simgolo.gif (10906 bytes)

Bev-SealŪ ULTRA Hoses and Tubing

Hosest~1.gif (161633 bytes)

Bev-SealŪ Ultra Series 175 Barrier Hoses

Oxygen and flavor barrier properties combined with flushability in a yarn-reinforced hose.

Part
Number
Standard
Package
Nominal
ID     OD
Working
Pressure
    70°F     122°F
Weight
Per Pkg.
Oetiker*
Clamp Size
(mm)
175-04500-XX
500' Spool
 .265     .420          300       150
20.0 lbs 9.1 kgs.
11.3-505RD
175-06300-XX
300' Spool
.375     .535
          300       150
17.2 lbs 7.8 kgs.
14.5-706RD
175-08300-XX
300' Coil
 .510     .675          250       125
18.7 lbs 8.5 kgs.
18.5-706RD

Individually numbered hoses are available for easy identification of multiple lines on special order.  A typical Part Number is 175-04500-XX for a 500 ft. spool of 1/4" size hose, where 'XX' indicates the number to be imprinted (use '00' for unnumbered hose).

Bev-SealŪ Ultra Series 235 Tubing

Unsurpassed oxygen and flavor protection combined with the true flushability of the Glas-Flex™ liner...NSF-51 and NSF-61 Listed.
 
Part
Number
Standard
Package
Nominal
ID     OD
Working
Pressure
    70°F     122°F
Weight
Per Pkg.
Oetiker*
Clamp Size
(mm)
235-05620-XX
500' Spool
 .190     .313          150         50
11.0 lbs 5.0 kgs.
8.7-505RD
235-06620-XX
500' Spool
.265     .375
          125         45
13.2 lbs 6.0 kgs.
10.0-706RD
235-08620-XX
500' Spool
 .380     .500          100         40
19.0 lbs 8.6 kgs.
14.0-706RD
235-10620-XX
500' Coil
 .510     .625            75         30
20.7 lbs 9.4 kgs.
17.0-706RD
235-11830-XX
500' Coil
 .510     .675          100         40
30.9 lbs 14.0 kgs.
17.5-706RD

Individually numbered tubing is available in the standard packaging as well as long-length bulk reels.  A typical Part Number is 235-08620-XX for a 500 ft. spool of 3/8" size tubing, where 'XX' indicates the number to be imprinted (use '00' for unnumbered tubing).

Note: The 'standard packages' are those listed above.

*Fitting recommendations are intended as guidelines only and no warranty is expressed or implied. Confirm compatibility of the combination for the intended application before using.