Parts Breakdown for WunderBar Handles
8 and 10 Button Post-Mix Handle - SERIES II AND 2.5
|
|
|||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 31-PH10-1 | Post-Mix Handle (only)Series II | 31-PH10-27-1 | Bottom Plate (Specify Colour*) |
| 31-PH10-2 | Button Plate (Specify Colour*) | 31-PH10-28 | Bottom Plate Screw (Use 31-PH15) |
| 31-PH10-3 | Button Plate Screw | 31-PH10-29 | Nozzle(Specify Colour*) Series II |
| 31-PH104-XX | Button (Specify Character/Clr) | 31-PH10-30 | Diffuser O'Ring-Series II (Use 31-PH16) |
| 31-PH10-5 | Button (Water) | 31-PH10-30 | Diffuser O'Ring-Series 2.5 |
| 31-PH10-6 | Button (Soda) | 31-PH10-31 | Button (Wine/Non-Carb, Pre-Mix) (Use 31-PH30-3 |
| 31-PH10-7 | Butterfly Retainer Screw | 31-PH10-32 | Soda/Water Button Foot Extension |
| 31-PH10-8 | Butterfly Retainer | 31-PH10-34 | Syrup Separator O'Ring-Series II |
| 31-PH109-1HL | Butterfly Plate - 1 Hole Left | 31-PH10-37 | Button Plug (Specify Clr*) |
| 31-PH109-1HR | Butterfly Plate - 1 Hole Right | 31-PH10-38 | Juice Diffuser Ring |
| 31-PH109-2H | Butterfly Plate - 2 Hole | 31-PH10-39 | Secondary Water Brix Screw |
| 31-PH109-3HL | Butterfly Plate - 3 Hole Left | 31-PH104-XX | Button Cap (Specify Character/Colour) |
| 31-PH109-3HR | Butterfly Plate - 3 Hole Right | 31-PH10-42A | Coca-Cola Handle Label (White/Red) |
| 31-PH109-4HL | Butterfly Plate - 4 Hole Left | 31-PH10-42B | Coca-Cola Handle Label (Red/Clear) |
| 31-PH109-4HR | Butterfly Plate - 4 Hole Right | 31-PH10-43 | Pepsi Cola Handle Label |
| 31-PH10-10 | Tube Retainer Plate | 31-PH10-47 | Diet Resistant Cork O'Ring |
| 31-PH10-11 | Tube Retainer Post | 31-PH10-48 | Grommet for Waitress Station |
| 31-PH10-12 | Handle Heel-SII and 2.5 (Specify Colour*) | 31-PH10-49 | Stainless Sheath Bushing - SII & 2.5 |
| 31-PH10-13 | 1/2" Handle Heel Screw | 31-PH10-52 | Secondary Water Brix Screw O'Ring |
| 31-PH10-14 | 1" Handle Heel Screw | 31-PH10-53 |
|
| 31-PH10-15 | Sheath - 13/16" Dia - Series II and 2.5 | 31-PH10-57 | Diffuser-Series II NOT SOLD |
| 31-PH10-16 | Sheath Bushing - Series II and 2.5 | 31-PH10-59 | Diffuser - Series 2.5 |
| 31-PH10-17 | Tube Ferrule - Polypropylene | 31-PH10-60 |
|
| 31-PH10-17S | Stainless Tube Ferrule(optional) | 31-PH10-65 |
|
| 31-PH10-18 | Tube Ferrule Cap-Polyproplene | 31-PH10-68 | Handle(only) Series 2.5 |
| 31-PH10-19 | Tube Seal O'Ring | 31-PH10-69 | Juice Diffuser Ring-Series 2.5 |
| 31-PH10-21 | Stem Spring | 31-PH10-70 | Molded Valve Plunger Stem |
| 31-PH10-20 | Stem O'Ring | ||
| 31-PH10-23 | Valve Plunger Stem | ||
| 31-PH10-24 | Valve Spring | ||
| 31-PH10-25 | Spring Hat - Polyproplene | ||
| 31-PH10-26 | Hat O'Ring | ||
| *Black is the standard colour for this part. For optional colour add suffix - R for Red, B for Blue. | |||
12 and 14 Button Post-Mix Handle - SERIES II AND 2.5
|
|
|||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 31-PH12-1 | Post-Mix Handle (only)Series II | 31-PH10-25 | Spring Hat - Polyproplene |
| 31-PH14-1 | 14 Button Post-Mix Handle | 31-PH10-26 | Hat O'Ring |
| 31-PH12-2 | 12 Button Plate (Specify Clr*) | 31-PH10-27-2 | 12 Bottom Plate (Spec.Clr*) |
| 31-PH14-2 | 14 Button Plate (Specify Clr*) | 31-PH10-27-4 | 14 Button Bottom Plate |
| 31-PH10-3 | Button Plate Screw | 31-PH10-28 | Bottom Plate Screw |
| 31-PH104-XX | Button (Specify Character/Clr) | 31-PH10-29 | Nozzle - Series II (Specify Colour*) (Use 31-PH15) |
| 31-PH10-5 | Button (Water) | 31-PH10-30 | Diffuser O'Ring-Series II (Use 31-PH16) |
| 31-PH10-6 | Button (Soda) | 31-PH14-30 | Diffuser O'Ring-Series 2.5 (Use 31-PH30-3) |
| 31-PH10-7 | Butterfly Retainer Screw | 31-PH10-31 | Button (Wine/Non-Carb Pre-Mix) |
| 31-PH10-8 | Butterfly Retainer | 31-PH10-32 | Soda/Water Button Foot Extension |
| 31-PH14-8 | Butterfly Retainer (for 4H Specials) | 31-PH10-34 | Syrup Separator O'Ring-Series II |
| 31-PH12-8 | Butterfly Retainer (for 4H Specials) | 31-PH10-37 | Button Plug (Specify Colour*) |
| 31-PH109-1HL | Butterfly Plate - 1 Hole Left | 31-PH10-38 | Juice Diffuser Ring |
| 31-PH109-1HR | Butterfly Plate - 1 Hole Right | 31-PH10-39 | Secondary Water Brix Screw |
| 31-PH109-2H | Butterfly Plate - 2 Hole | 31-PH104-XX | Button Cap (Specify Character/Colour) |
| 31-PH109-3HL | Butterfly Plate - 3 Hole Left | 31-PH10-42A | Coca-Cola Handle Label (White/Red) |
| 31-PH109-3HR | Butterfly Plate - 3 Hole Right | 31-PH10-42B | Coca-Cola Handle Label (Red/Clear) |
| 31-PH109-4HL | Butterfly Plate - 4 Hole Left | 31-PH10-42 | Pepsi Cola Handle Label |
| 31-PH109-4HL | Butterfly Plate - 4 Hole Right | 31-PH10-47 | Diet Resistant Cork O'Ring |
| 31-PH109-4HS | Butterfly Plate - 4 Hole (Special #2-8) | 31-PH10-48 | Grommet for Waitress Station |
| 31-PH12-10 | Tube Retainer Plate | 31-PH10-49 | Stainless Steel Sheath Bushing 7/8" |
| 31-PH14-10 | Tube Retainer Plate | 31-PH10-52 | Secondary Water Brix Screw O'Ring |
| 31-PH10-11 | Tube Retainer Post | 31-PH10-53 | Oval Button Cap (Water/Soda) (Use 31-PH104-WW for Water) (Use 31-PH104-SW for Soda) |
| 31-PH12-12 | Handle Heel (Specify Colour*) | 31-PH10-57 | Diffuser - Series II NOT SOLD |
| 31-PH14-12 | Handle Heel (Specify Colour*) | 31-PH10-59 | Diffuser - Series 2.5 (Diffusers are available only as part of Handle Ass'y) |
| 31-PH10-13 | 1/2" Handle Heel Screw | 31-PH10-60 | Twist Lock Nozzle - Series 2.5 (Use 31-PH15) |
| 21-PH14-13 | 5/8" Handle Heel Screw | 31-PH10-65 | Syrup Separator - Series 2.5 (Use 15-PH10-65) |
| 31-PH10-14 | 1" Handle Heel Screw | 31-PH12-68 | Handle (Only) Series 2.5 |
| 31-PH12-15 | Sheath - 7/8" Diameter | ||
| 31-PH14-15 | Sheath 15/16" | ||
| 31-PH12-16 | Sheath Bushing 7/8" Plastic | ||
| 31-PH14-16 | Sheath Bushing 15/16" Plastic | ||
| 31-PH10-17 | Tube Ferrule-Polyproplene | ||
| 31-PH10-17S | Stainless Tube Ferrule(Optional | ||
| 31-PH10-18 | Tube Ferrule Cap-Polyproplene | ||
| 31-PH10-19 | Tube Seal O'Ring | ||
| 31-PH10-20 | Stem O'Ring | ||
| 31-PH10-21 | Stem Spring | ||
| 31-PH10-22 | Cork O'Ring (see PH10-47) | ||
| 31-PH10-23 | Valve Plunger Stem | ||
| 31-PH10-24 | Valve Spring | ||
| *Black is the standard colour for this part. For optional colour add suffix - R for Red, B for Blue. | |||
6 and 8 Button Juice Handle - SERIES II AND 2.5
|
|
|||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 31-PH10-1-JD | Juice 6 & 8 Handle (Only) Series II | 31-PH10-27-1 | Bottom Plate (Specify Colour*) |
| 31-PH10-2-6J | (8J) Juice 6 Button Plate (Specify Colour*) | 31-PH10-28 | Bottom Plate Screw |
| 31-PH10-3 | Button Plate Screw | 31-PH10-29 | Nozzle - Series II (Specify Colour) (Use 31-PH15) |
| 31-PH104-XX | Button (Specify Character/Colour) | 31-PH10-30 | Diffuser O'Ring - Series II (Use 31-PH16) |
| 31-PH10-5 | Button (Water) | 31-PH14-30 | Diffuser O'Ring - Series III (Use 31-PH30-3) |
| 31-PH10-7 | Button Retainer Screw | 31-PH10-31 | Button (Non-Carb, Pre-Mix) |
| 31-PH10-8 | Butterfly Retainer | 31-PH10-32 | Soda/Water Button Foot Extension |
| 31-PH109-1HL | Butterfly Plate - 1 Hole Left | 31-PH10-34 | Syrup Separator O'Ring - Series II |
| 31-PH109-1HR | Butterfly Plate - 1 Hole Right | 31-PH10-37 | Button Plug (Specify Colour*) |
| 31-PH109-2H | Butterfly Plate - 2 Hole | 31-PH10-38 | Juice Diffuser Ring - Series II |
| 31-PH109-3HL | Butterfly Plate - 3 Hole Left | 31-PH10-39 | Secondary Water Brix Screw |
| 31-PH109-3HR | Butterfly Plate - 3 Hole Right | 31-PH104-XX | Button Cap (Specify Character/Colour) |
| 31-PH109-4HL | Butterfly Plate - 4 Hole Left | 31-PH10-42A | Coca-Cola Handle Label (White/Red) |
| 31-PH109-4HR | Butterfly Plate - 4 Hole Right | 31-PH10-42B | Coca-Cola Handle Label (Red/Clear) |
| 31-PH10-10 | Tube Retainer Plate | 31-PH10-43 | Pepsi Cola Handle Label |
| 31-PH10-11 | Tube Retainer Post | 31-PH10-44 | Schweppes Handle Label |
| 31-PH10-13 | 1/2" Retainer Plate Screw | 31-PH10-45 | Lock for Handle Cover |
| 31-PH10-14 | 1" Retainer Plate Screw | 31-PH10-47 | Diet Resistant Cork O'Ring |
| 31-PH12-15 | Sheath 7/8" Diameter | 31-PH10-48 | Grommet for Waitress Station |
| 31-PH12-16 | Sheath Bushing 7/8" (Plastic) | 31-PH12-49 | Stainless Steel Sheath Bushing - 7/8" |
| 31-PH10-17 | Tube Ferrule - Polyproplene | 31-PH10-50 | Butterfly Plate Conversion Kit |
| 31-PH10-17S | Stainless Tube Ferrule (Optional) Tube Ferrule Cap - Polyproplene | 31-PH10-52 | Secondary Water Brix Screw O'Ring |
| 31-PH10-19 | Tube Seal O'Ring | 31-PH10-53 | Oval Button Cap (Water) |
| 31-PH10-20 | Stem O'Ring | 31-PH10-57 | Diffuser - Series II |
| 31-PH10-21 | Stem Spring | 31-PH10-59 | Diffuser - Series III (Diffusers are available only as part of Handle Ass'y. |
| 31-PH10-23 | Valve Plunger Stem | 31-PH10-60 | Twist Lock Nozzle - Series II (Use 31-PH15) |
| 31-PH10-24 | Valve Spring | 31-PH10-65 | Syrup Separator - Series 2.5 (Use 15-PH10-65) |
| 31-PH10-25 | Spring Hat | ||
| 31-PH10-26 | Hat O'Ring | ||
| *Black is the standard colour for this part. For optional colour add suffix - R for Red, B for Blue. | |||
1 Button Fast Flow Handle
|
|
|
| PART NO. | DESCRIPTION |
| 31-PH10-3 | Button Plate Screw |
| 31-PH10-4 | Soda/Water Button Foot Extension |
| 31-PH10-5A | Wunder-Bar Label |
| 31-PH10-7 | Butterfly Retainer Screw |
| 31-PH10-11 | Tube Retainer Post |
| 31-PH10-13 | 1/2" Handle Heel Screw |
| 31-PH10-14 | 1" Handle Heel Screw |
| 31-PH10-28 | Bottom Plate Screw |
| 31-PH10-29 | Nozzle (Use 31-PH15) |
| 31-PH10-30 | Diffuser O'Ring (Use 31-PH16) |
| 31-PH104-XX | Button Cap (Specify Character/Colour) |
| 31-PH12-12 | Handle Heel |
| 31-PH12-15 | Sheath 7/8" dia Series III |
| 31-PH12-49 | Stainless Sheath Bushing |
| 31-PHW-8 | Tube Large 37 1/4" |
| 31-PHW-9 | Ferrule |
| 31-PHW-10 | Interconnect Fitting |
| 31-PHW-16 | Stem O'Ring |
| 31-PHW-17 | Diet Resistant Cork O'Ring |
| 31-PHW-18 | Valve Plunger Stem |
| 31-PHW-19 | Valve Spring |
| 31-PHW-20 | Spring Hat - Polyproplene |
| 31-PHW-21 | Hat O'Ring |
| 31-FF1-1 | Post-Mix Handle (Only) |
| 31-FF1-8 | Butterfly Retainer |
| 31-FF1-9 | Butterfly Plate |
| 31-FF1-27 | Bottom Plate |
2 Button Fast Flow Handle
|
|
|
| PART NO. | DESCRIPTION |
| 31-PH10-3 | Button Plate Screw |
| 31-PH10-4 | Soda/Water Button Foot Extension |
| 31-PH10-5A | Wunder-Bar Label |
| 31-PH10-7 | Butterfly Retainer Screw |
| 31-PH10-8 | Butterfly Retainer |
| 31-PH10-11 | Tube Retainer Post |
| 31-PH10-13 | 1/2" Handle Heel Screw |
| 31-PH10-14 | 1" Handle Heel Screw |
| 31-PH10-28 | Bottom Plate Screw |
| 31-PH10-29 | Nozzle (Specify Colour*) (Use 31-PH15) |
| 31-PH10-30 | Diffuser O'Ring (Use 31-PH16) |
| 31-PH104-XX | Button Cap (Specify Character/Colour) |
| 31-PH109-2H | Butterfly Plate |
| 31-PH12-12 | Handle Heel |
| 31-PH12-15 | Sheath 7/8" Diameter Series III |
| 31-PH12-16 | Sheath Bushing 7/8" (Plastic) |
| 31-PH12-49 | Stainless Sheath Bushing |
| 31-PHW-8 | Bottom Plate |
| 31-PHW-9 | Ferrule |
| 31-PHW-10 | Interconnect Fitting |
| 31-PHW-16 | Stem O'Ring |
| 31-PHW-18 | Valve Plunger Stem |
| 31-PHW-19 | Valve Spring |
| 31-PHW-20 | Spring Hat - Polyproplene |
| 31-PHW-21 | Hat O'Ring |
| 31-FF2-1 | Post-Mix Handle (Only) |
| 31-FF2-2 | Button Plate |
| 31-FF-27 | Bottom Plate |
Post-Mix 10 Button Mini Tower - TOWER ASSEMBLY
|
Post-Mix 10 Button Mini Tower |
Post-Mix 10 Button Mini Tower - Light Box | ||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 31-PM-MT-001 | Tower Pedestal | 31-PM-MTL-001 | Light Box Frame |
| 31-PM-MT-002 | Tower Pedestal Back Plate | 31-PM-MTL-002 | Light Box Logo Frame |
| 31-PM-MT-003 | Drip Tray | 31-PM-MTL-003 | Logo Plate |
| 31-PM-MT-004 | Drip Tray Screen | 31-PM-MTL-004 | Logo Plate Rail |
| 31-PM-MT-005 | 6-32 x 3/8" Drip Tray Screws | 31-PM-MTL-005 | 4-40 x 3/8" Phil Flat Screw |
| 31-PM-MT-006 | Post-Mix Tower Head | 31-PM-MTL-006 | 4-40 x 3/8" Phil Round Screw |
| 31-PM-MT-007 | Post-Mix Tower Head Top Plate | 31-PM-MTL-007 | Light Bulb Holder |
| 31-PM-MT-008 | Post-Mix Tower Head Back Plate | 31-PM-MTL-008 | 5w Bulb |
| 31-PM-MT-009 | Post-Mix Tower Head Handle Assembly | 31-PM-MTL-009 | Power Supply |
| 31-PH10-2 | Button Plate | 31-PM-MTL-010 | Fuse |
| 31-PH104-XX | Button (Specify Character/Colour) | 31-PM-MTL-011 | Strain Relief |
| 31-PH104-XX | Large Button Cap (Specify Character/Colour) | 31-PM-MTL-012 | Stick On Insulation |
| 31-PH10-29 | Nozzle (Use 31-PH15) | ||
| 31-PH10-30 | Diffuser O'Ring | ||
| 31-PM-MT-012 | Post-Mix Tower Handle Spacers | ||
| 31-PM-MT-013 | Handle Attachment Screws 6-32 x 3/8" | ||
| 31-PM-MT-014 | 4-40 x 3/8" Screws (20) Phil Flat Head | ||
| 31-PM-MT-015 | 4-40 x 3/8" Round Head Screws | ||
| 31-PM-MT-016 | Kwik Mount Plate Complete | ||
| 31-PM-MT-017 | Brix Manifold (5 Product) | ||
| 31-PM-MT-018 | Mounting Bracket | ||
| 31-PM-MT-019 | Centre Drain Drip Tray | ||
| 31-PM-MT-020 | Centre Drain Drip Tray Screen | ||
| 31-PM-MT-021 | Centre Drain Drip Tray Stem Mount Nut | ||
Pre-Mix Bar Dispenser
|
|
|||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 31-PX1 | Handle | 31-PX22 | Tube Swivel Nut 1/4" or 5/16" |
| 31-PX2 | Button Cover Plate | 31-PX23 | Barbed Stem Fitting |
| 31-PX3 | Handle Heel | 31-PX24 | Nylon Washer |
| 31-PX4 | Tubing Retainer Plate | 31-PX25 | Tube Ferrule |
| 31-PX5A | Fitting Spacer (Short) | 31-PX26 | Bottom Heel Screw |
| 31-PX5B | Fitting Spacer (Long) | 31-PX27 | Retainer Plate Screw |
| 31-PX5C | Fitting Spacer (Medium) | 31-PX28 | Tube Sheath |
| 31-PX6-XX | Button (Specify Character) | 31-PX29 | Retainer Nut |
| 31-PX7A | Valve Linkage L and C | 31-PX29A | Retainer Nut Washer |
| 31-PX7B | Valve Linkage S and W | 31-PX30 | Cold Plate Ice Shield |
| 31-PX7C | Valve Linkage G | 31-PX30A | Special 7 Pass Cold Plate Ice Shield |
| 31-PX7D | Valve Linkage T and Q | 31-PX31 | Sheath Retainer |
| 31-PX9E | Valve Extension L and C | 31-PX32 | Rubber Washer |
| 31-PX9F | Valve Extension G | 31-PX33 | Stainless Steel Backing Washer |
| 31-PX9G | Valve Extension S and W | 31-PX34 | Sheath Retainer Screw |
| 31-PX9H | Valve Extension T and Q | 31-PX35 | Drip Cup |
| 31-PX10 | Valve Extension O'Ring | 31-PX36 | Hose Hanger |
| 31-PX11 | Rear Cover Plate Screw (Short) | 31-PX37 | Hose Hanger Kit Complete (Less Ice Shield Hardware) |
| 31-PX12 | Rear Cover Plate Screw (Long) | 31-PX38 | Hose Hanger Kit Complete (With Ice Shield Hardware) |
| 31-PX13 | Front Plate Screw | 31-PX39 | Pre-Mix Parts Kit Complete |
| 31-PX14 | Valve Tail | 31-PX41 | Pre-Mix Stainless Steel Locking Handle Cover |
| 31-PX15 | Valve O'Ring | 31-PX42-XX | Button Cap (Specify Decoration) |
| 31-PX16 | Valve Head | ||
| 31-PX17 | Valve Spring | ||
| 31-PX18 | Tube Fitting O'Ring | ||
| 31-PX19 | Tube Fitting | ||
| 31-PX20 | Sheath Collar | ||
| 31-PX21 | Product Tube | ||