BAG-IN-BOX

FLOJET

Beverage Pumps Gas (CO2) Air Driven - 5000 Series
Applications Designed for dispensing Bag-In-Box syrups, juice concentrate (without pulp or particulate), teas, wines, draft beers and liquor Supplies the following from remote location: four (4) 3.0oz. valves 1 or two (2) 4.5 oz. valves 2 1. Each valve dispenses syrup at 0.5 oz./sec. 2. Each valve dispenses syrup at 0.75 oz./sec.
Special Features Compact design; with quick disconnect fittings for simple, quick installation. Shuts off automatically when bag is empty and restarts when a full bag is connected. Fully automatic, operates only when beverage is being dispensed. 1/4" barbed, CO2 exhaust port connection for venting away from confined areas. Maintains constant pressure at the dispensing valve. High suction capability empties bag to a minimum residual. Service life up to 20,000 gal. (75,700 L). Approved by all leading soft drink manufacturers.	Specifications Pump Design: Positive displacement, double diaphragm pump Flow Rate: 4.0 oz./sec. - Open Flow Operating Pressure: 20 to 80 psi (1.4 to 5.5 bar) Liquid Inlet Pressure: 15 psi (1.03 bar) max. Approvals: NSF and SK Warranty: 3 years
	The Service Pump is supplied without the auto shutoff and fittings.  Since there is no need to cut hose when replacing a Flojet pump, this model is ideal for simple, quick on-site replacement.
Standard Model Numbers
Model Number     Description 35-5000-140       Flojet Pump - General Beverage 35-5000-512       Flojet Pump - Coca-Cola 35-5000-135       Flojet Service Pump - General Beverage 35-5000-520       Flojet Service Pump - Coca-Cola 35-5000-505       Flojet 2 Pump System Assembled for Coca-Cola, Includes Mounting Board, Hose & Bag Connectors 35-5000-503       Flojet 3 Pump System Assembled for Coca-Cola, Includes Mounting Board, Hose & Bag Connectors

Beverage Pumps - Electric - 2125 Series
Applications Designed for dispensing Bag-In-Box syrups, juice concentrate (without pulp or particulate), teas, Bag-in-Box wines and liquor Ideal for use in mobile carts and vending applications, where CO2 is not available.	Special Features Built-in vacuum switch shuts off pump when bag is empty and turns on 'Sold Out' light.  When full bag is connected, pump will restart automatically and 'Sold Out' light will go out. Safety timer turns the pump off automatically after three minutes, in case an airlock condition occurs in the pump or a malfunction in the system. Manual reset button is provided to restart the pump. Adjustable pressure switch allows pump to turn on and off automatically when dispensing valve is opened or closed. Self-priming up to 6 ft. (1.8 m). Runs dry without damage.
Specifications Pump Design:  Double diaphragm Ports:  1/4" NPT, female Motor:  Permanent magnet with solid state rectifier Cycles: 50/60 Hz Timer:  3 minutes Recommended Duty Cycle: 25% NSF approved UL listed Warranty: 1 year
Standard Model Numbers
Model Number     Voltage                     Adjustable Pressure Switch                 Operational Flow 35-2125-030         115 Volt AC             30 to 50 psi max. (2.4 to 3.4 bar)        1 oz./sec. (29.5 ml./sec.) 35-2125-507         115 Volt AC             70 to 90 psi max. (4.8 to 6.2 bar)        0.5 oz./sec. (14.8 ml./sec.) 35-2125-230         230 Volt AC             30 to 50 psi max. (2.4 to 3.4 bar)        1 oz./sec. (29.5 ml./sec.) 35-2125-508         230 Volt AC             70 to 90 psi max. (4.8 to 6.2 bar)        0.5 oz./sec. (14.8 ml./sec.)

Water Booster Pumps - Electric - Pentaflex Series
Applications   Water boosting for filtration systems, supply carbonators, non-carbonated dispensing valves, carts, coffee machines, hand sinks, ice machines and FCB equipment. Supplies up to 2.2 GPM (8.3 L/min.) max.	Special Features Unique five piston design for quiet, pulsation free, smoother flow. Self-priming and runs dry without damage. Pressure compensating bypass automatically adjusts flow pressure as inlet pressures fluctuate. Built-in check valve to prevent back flow.
Specifications Pump Design: Positive displacement, five chamber diaphragm Flow Rate: 2.2 gal./min (8.6 L/min) - open flow Pressure Switch: 80 psi Water Inlet Pressure: 30 psi (2.1 bar) max. Warranty: 1 year
Standard Model Numbers
Model Number     Description 35-P60-1011         100/115 Volt AC, 60 Hz, 6 ft. (1.8m) cord and plug 35-P85-1011         220/240 Volt AC, 50 Hz, 6 ft. (1.8m) cord, fully suppressed 35-P86-1011         220/240 Volt AC, 50 Hz, 6 ft. (1.8m) cord, partially suppressed

Wine & Cider Pumps - Electric - Pentaflex Series
Applications   Designed for bulk jug dispensing Supplies up to 3 oz./sec. (88.7 ml./sec.) with smooth flow. For Bag-in-Box wine dispensing please see Electric Beverage Pumps.	Special Features Unique five piston design for smoother flow. Self priming and runs dry without damage. Timer shuts down pump automatically, after three minutes of continuous running with no product dispensed. Built-in check valve to prevent back flow.
Specifications Pump Design:  Positive displacement, five chamber diaphragm Flow Rate: 3.0 oz./sec. (88.7 ml./sec.) - Open flow Pressure Switch: 45 psi (3.1 bar) Timer:  Automatic shutoff when pump runs for 3 minutes with empty container Product Inlet Pressure: 30 psi (2.1 bar) max. Warranty: 1 year
Standard Model Numbers
Model Number     Voltage                         Pressure Switch 35-P90-1012         230 Volt AC, 50 Hz    Adjustable to four positions between 25 & 45 psi

Carbonator Pumps - Electric - Pentaflex Series
Applications   Designed for low volume, cold carbonation dispensing systems.	Special Features Unique five piston design for smoother flow. Self priming and runs dry without damage. Pressure compensating bypass provides even, consistent water pressure. Built-in check valve to prevent back flow.
Specifications Pump Design:  Positive displacement, five chamber diaphragm Flow Rate: High Flow Model 96 GPH (360 L/hr.) open flow; Super High Flow Model 120 GPS (456 L/hr.) open flow. Operating Pressures: High Flow Model 140 psi (9.7 bar); Super High Flow Model 140 psi (9.7 bar) Water Inlet Pressure: 30 psi (2.1 bar) max. Warranty: 1 year
Standard Model Numbers
Model Number     Voltage                     Description 35-P55-1011         115 Volt AC             Super High Flow 35-P51-1010         115 Volt AC             High Flow 35-P70-1011         230 Volt AC             Super High Flow 35-P65-1010         230 Volt AC             High Flow

Bottled Water Dispenser
Applications Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts. For remote locations where water supply is inaccessible.
Special Features Compact size for easy mounting. Float switch for automatic shut-off, when bottle is empty. Built in check valve to prevent back flow. Universal seal cap and adjustable dip tube will accommodate most bottle sizes. 1/4" ID x 20' (6.1 m) discharge hose included. Optional water faucet.
Specifications Pump Design:  Positive displacement, double  diaphragm Flow Rate: 1.0 GPM (3.8 L/min.) Discharge Hose: 1/4" x 20' (6.1 m) UL and CUL listed
Standard Model Numbers Model Number     Voltage                     Cord 10-7030                 115 Volt AC            6' (1.8 m) cord w/plug 10-7031                 115 Volt AC            6' (1.8 m) cord w/plug (includes drinking water faucet)