DIRECT DRAW STANDARDS
TAP-RITE STANDARDS ARE ENGINEERED FOR LONG DEPENDABLE SERVICE.
Hose connector with wing nut stainless steel tube and male beer nut.
Polished chrome or brass finish.
Available in 2 1/2" O.D. or 3" O.D. models.
Closed cell insulation to eliminate warm up problems during slow serving periods.
Chrome plated flange cover on 2 1/2" O.D. models.
Mounting gasket, screws and faucet knob are included.
Polished brass models have a special baked epoxy finish to prevent tarnishing.
| 2 1/2" O.D. MODELS | |||||
 |
PART NO. | SPOUT TO FLANGE | CONNECTOR | FAUCET HEAD | FINISH |
| 75-D4740 | 9 1/4" | 3/16" I.D. X 50" EXPOSED TAPROID WITH WING NUT | T-R WITH S/S LEVER | POLISHED CHROME | |
| 75-D4740K | 9 1/4" | 3/16" I.D. X 50" EXPOSED TAPROID WITH WING NUT | T-R WITH BRASS LEVER | POLISHED CHROME | |
| 75-D4740BR | 9 1/4" | 3/16" I.D. X 50" EXPOSED TAPROID WITH WING NUT | T-R WITH STAINLESS STEEL LEVER | POLISHED BRASS | |
| 3" O.D. MODELS | |||||
 |
PART NO. | SPOUT TO FLANGE | CONNECTOR | FAUCET HEAD | FINISH |
| 75-D473T | 9 1/4" | 50" EXPOSED TAPROID | T-R WITH S/S LEVER | POLISHED CHROME | |
| 75-D4743TK | 9 1/4" | 50" EXPOSED TAPROID | T-R WITH BRASS LEVER | POLISHED CHROME | |
| 75-D4743S | 9 1/4" | 6" EXPOSED S/S TUBE W/MALE BEER NUT | T-R WITH S/S LEVER | POLISHED CHROME | |
| 75-D4743SBR | 9 1/4" | 6" EXPOSED S/S TUBE W/MALE BEER NUT | T-R WITH S/S LEVER | POLISHED BRASS | |
| 75-D4743TBR | 9 1/4" | 50" EXPOSED TAPROID | T-R WITH S/S LEVER | POLISHED BRASS | |
DOUBLE HEAD MODELS
This three inch O.D. standard has 2 T-R beer faucet heads spaced 90º apart so that one can be used to draw two different brands or types of beer. Available with 2-50" exposed Taproid connectors or 6" exposed stainless steel tubes and male nuts.
| PART NO. | SPOUT TO FLANGE | CONNECTOR | FAUCET HEAD | FINISH |
| 75-D4743DT | 9 1/4" | 2 - 50" EXPOSED TAPROID | 2 T-R WITH S/S LEVER | POLISHED CHROME |
| 75-D4743DS | 9 1/4" | 2 - 6" EXPOSED S/S TUBE AND NUT | 2 T-R WITH S/S LEVER | POLISHED CHROME |
| 75-D4743DTBR | 9 1/4" | 2 - 50" EXPOSED TAPROID | 2 T-R WITH S/S LEVER | POLISHED BRASS |
| 75-D4743DSBR | 9 1/4" | 2 - 6" EXPOSED S/S TUBE AND NUT | 2 T-R WITH S/S LEVER | POLISHED BRASS |
| TAP-RITE DIRECT DRAW STANDARD PARTS |
|
| TAP-RITE DIRECT DRAW STANDARD PARTS | |||
| PART NO. | DESCRIPTION | PART NO. | DESCRIPTION |
| 75-4301 | KNOB | 75-D12-3PA | 3" CAP WITH INSULATION AND O'RING (POLISHED CHROME) |
| 75-4833 | TAP-RITE HEAD (POLISHED CHROME) | 75-D12-3PABR | 3" CAP WITH INSULATION AND O'RING (POLISHED BRASS) |
| 75-4833K | TAP-RITE HEAD (BRASS LEVER) | 75-D13-2 | 1/2" CAP INSULATION |
| 75-4833BR | TAP-RITE HEAD (POLISHED BRASS) | 75-D13-3 | 3" O.D. CAP INSULATION |
| 75-4332 | COUPLING NUT | 75-D14-9 | 2 1/2" O.D. CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED CHROME) |
| 75-4332BR | COUPLING NUT (BRASS PLATED) | 75-D14-9BR | 2 1/2" O.D. CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED BRASS) |
| 75-D5N | 3/16" BORE SHANK (USE 75-D4N-3) | 75-D14-9-3 | 3" O.D. CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED CHROME) |
| 75-D5N-4 | 1/4" BORE SHANK (USE 75-D4N-3) | 75-D14-9-3DBR | 3" O.D. CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED BRASS) |
| 75-D6 | 2 1/2" O.D. OUTSIDE FLANGE (POLISHED CHROME) | 75-D14-9-3D | 3" O.D. 2 FAUCET CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED CHROME) |
| 75-D6BR | 2 1/2" O.D. OUTSIDE FLANGE (POLISHED BRASS) | 75-D14-9-3BR | 3" O.D. 2 FAUCET CYLINDER 9 1/4" SPOUT TO FLANGE (POLISHED BRASS) |
| 75-D6M-3L | 3" O.D. OUTSIDE FLANGE (POLISHED BRASS) | 75-D14-11 | 2 1/2" O.D. 2 FAUCET CYLINDER 11" SPOUT TO FLANGE (POLISHED CHROME) |
| 75-D6M-3LBR | 3" O.D. OUTSIDE FLANGE (POLISHED BRASS) | 75-D15-2P | 2 1/2" O.D. FLANGE COVER (POLISHED CHROME) |
| 75-D7P | INSIDE FLANGE | 75-D15-2PBR | 2 1/2" O.D. FLANGE COVER (POLISHED BRASS) |
| 75-D8 | LOCK NUT | 75-D16 | 2 1/2" O.D. MOUNTING GASKET |
| 75-D8WC | WRENCH FOR TIGHTENING 75-D8 SHANK NUT | 75-D16-3 | 3" O.D. MOUNTING GASKET |
| 75-D8WP | WRENCH FOR TIGHTENING PERLICK SHANK NUT | 75-D17-8-3 | 3" O.D. CYLINDER INSULATION |
| 75-D9R | GLAND | 75-D17-8 | 2 1/2" O.D. CYLINDER INSULATION |
| 75-D10 | INVERTED FLANGE NUT | 75-D17-8L | 2 1/2" O.D. CYLINDER INSULATOR (11" SPOUT TO FLANGE) |
| 75-D11N | STAINLESS STEEL ELBOW | 75-D19-60AC | 3/16" X 60" HOSE CONNECTOR WITH WING NUT (50" EXPOSED HOSE) |
| 75-D12-1 | 2 1/2" O.D. CAP O'RING | 75-D22AN | 1 PIECE 1/4" I.D. STAINLESS STEEL TUBE WITH SHANK AND MALE BEER NUT |
| 75-D12-1-3 | 3" O.D. CAP O'RING | 75-D22ANA-3 | 1/4" O.D. STAINLESS STEEL TUBE WITH SHANK AND BEER NUT ASSEMBLED WITH OUTSIDE FLANGE, INSIDE FLANGE, LOCK NUT, COUPLING NUT, SLEEVE AND SNAP-RING (USED ON 3" O.D. STANDARDS) |
| 75-D12-2PA | 2 1/2" CAP WITH INSULATION AND O'RING (POLISHED CHROME) | 75-D32AN | 1 PIECE 5/16" O.D. STAINLESS STEEL TUBE WITH SHANK AND MALE BEER NUT |
| 75-D12-2PABR | 2 1/2" CAP WITH INSULATION AND O'RING (POLISHED BRASS) | 75-D32ANA-3 | 5/16" STAINLESS STEEL TUBE WITH SHANK AND MALE BEER NUT ASSEMBLED WITH OUTSIDE FLANGE, INSIDE FLANGE, LOCK NUT, COUPLING NUT, SLEEVE AND SNAP-RING (USED ON 3" O.D. STANDARDS) |