wpe2.gif (2620 bytes)

INSTALLATION

COLD PLATES - PRE-MIX/POST-MIX

ColdPlate.gif (794 bytes)

Pure Aluminum For Maximum Cooling

 

 

 

Part No. Plate Size No.of Circuits Tubing Length Each Circuit

Approx. Cooling Capacity

27-0001 8 x 12 1 10 ft. 6" 150 drinks/hr*
27-0002 8 x 12 2 10 ft. 6" 150 drinks/hr
27-0004 8 x 14 2 12 ft. 200 drinks/hr
27-0005 8 x 14 3 12 ft. 200 drinks/hr
27-0006 8 x 14 4 12 ft. 200 drinks/hr
27-0007 8 x 14 5 12 ft. 200 drinks/hr
27-0008 8 x 14 6 12 ft. 200 drinks/hr
27-0009 8 x 14 7 12 ft. 200 drinks/hr
27-0010 10 x 15 1 17 ft. 290 drinks/hr
27-0011 10 x 15 2 17 ft. 290 drinks/hr
27-0012 10 x 15 3 17 ft. 290 drinks/hr
27-0013 10 x 15 4 17 ft. 290 drinks/hr
27-0014 10 x 15 5 17 ft. 290 drinks/hr
27-0015 10 x 15 6 17 ft. 290 drinks/hr
27-0020 12 x 18 4 22 ft. 380 drinks/hr
Fittings in plate: female flare 1/2" - 16 B.S.F.
Circuits in plate are clearly identified.   Serial number imprinted.
Long and short legs for immediate water run-off.
Easy to install or to remove.  No service costs.
Convenient back-up or stand-by function for undersized or defective electrical cooling units.

*Based on 6 ounce drinks dispensed at 1 ounce per second, in ambient temperature of 750F and out-temp. below 400F., hard ice in contact with plate and adequate water drainage.

Cold Plate Fittings:   Cold Plate prices include fittings.  Two fittings required for each cooling coil.  Specify Cold Plate fittings that you desire.

FLARED
BARBED
Part No.
Size
Part No.
Size
02-6005
7 1/6" - 10
02-6129
.265
02-6006
1/2" - 16
02-6121
.375