wpe2.gif (2620 bytes)

Fluid-o-Tech Brass Rotary Vane Pumps, Clamp Mount

3.gif (56648 bytes) The inlet and outlet ports are 3/8" NPT threaded.

The pump is equipped with a built-in by-pass; a special balanced by-pass (able to maintain the set pressure for variations of the inlet pressure) is available upon request. A built-in mechanical filter with a 71 mesh screen is available on all models.

All models, upon request, are available:

  • with special clearances (suffix - H) for temperature higher than 70C (158F) max 90C (194F)
  • with Viton/EPDM seals (suffix - V/E) for special fluids
  • NSF listed pumps for potable water. PA series.
  • WRAS approved pumps. POW series.

 

Technical features and
manufacturing characteristics

The rotary vane pump is brass made with a stainless steel AISI 303 rotor, while the pumping chamber and the vanes are in graphitic carbon.

 Main Applications
  • Beverage vending machines
  • Post-mix drink dispensers
  • Espresso coffee machines
  • Cooling systems
  • Reverse osmosis
  • Ultra-filtration

4.gif (21451 bytes)

Fluid-o-Tech brass rotary vane pumps, clamp mount

Chart 3.eps (461510 bytes)

1450RPM.eps (415946 bytes)

 

Chart 4.eps (461466 bytes)

1725RPM a.eps (430486 bytes)